‘This is a call to action’, RCEM & College of Paramedics say as Lords Public Services Committee detail scale of crisis in Emergency Care

‘This is a call to action’, RCEM & College of Paramedics say as Lords Public Services Committee detail scale of crisis in Emergency Care

#
‘This is a call to action’, RCEM & College of Paramedics say as Lords Public Services Committee detail scale of crisis in Emergency Care
Responding to the House of Lords Public Services Committee’s report Emergency Healthcare: a national emergency published today, Dr Adrian Boyle, President of the Royal College of Emergency Medicine, said:

“We thank the Lords Public Services Committee for their time and for the publication of this important report. We welcome the gravity, openness, and honesty with which they have acknowledged and laid out the reality of the crisis in Emergency Care and its severe impact on both patients and staff.

“The report is exactly right: lack of hospital capacity; lack of adequate or sufficient social care; fundamentally dishonest 12-hour waiting time data; inability to admit patients; inability to discharge patients; these have all contributed to a crisis on a scale not seen before. A crisis which has led to a gridlock across health services, and in turn has led to dangerous crowding and extremely long waiting times that we know are associated with patient harm and patient deaths. Emergency Medicine staff and paramedic colleagues have been stretched to their limit trying to mitigate the harm to patients and continue delivering effective care, but it is extremely challenging in the current circumstances. Staff can no longer burn themselves out on adrenaline and goodwill alone.

“We welcomed the £250 million that the government pledged to social care and to tackle ambulance handover delays. We are yet to see the detail on when this funding will be made available for local systems and when the extra care home capacity will be opened. NHS England have pledged to open 7,000 beds in hospitals including virtual wards, again, we are yet to see the detail on how many of these beds have since been opened, how many are virtual, and where we can track these data.

“While both of these steps are welcome and rightly aim to tackle the immediate impact of the crisis, there remains an unwillingness to take the necessary, meaningful long-term, cross-party action to tackle the root. This crisis was foreseeable and has been culminating since long-before the pandemic. A decade of under-funding, under-resourcing, cuts to social care all matched with a failure for long-term workforce planning and a significant shortfall in beds have led us to a broken health and social care system.

“It is time for the government to face this dire crisis, to finally acknowledge its depth, and to take the necessary meaningful action to tackle it. We urgently need to see long-term workforce planning; this must begin with retention – this means valuing and supporting existing staff who have faced years of exceptionally challenging conditions. We must see significant, continued, and sustained investment in social care – including an immediate bolstering of the social care workforce, to ensure patients can be supported and discharged in a timely way. We must see acute capacity across England expanded where safely possible. Lastly, the Committee are absolutely right, NHS England must now publicly publish monthly 12-hour A&E waiting time data measured from the time of arrival at the Emergency Department, as a matter of transparency and honesty.”

Tracy Nicholls, Chief Executive of the College of Paramedics, said:

“The insightful Lords Public Services Committee report today lays bare the stark reality of the inability of paramedics, ambulance clinicians and our emergency colleagues to provide the care they want, and that patients deserve. What now needs to follow is meaningful action, not further rhetoric. Patients suffered harm yesterday, and today, and will suffer harm tomorrow, so time is imperative. Moral injury of paramedics and ambulance clinicians is a reality, so the College supports RCEM’s call for meaningful actions, including longer-term workforce planning.”

Rugged Hank

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties.     This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it.   Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping.   Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time.   image002.jpg   On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home:   1.     Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone.    It is important to have a debris free surface, clear any clutter from the floor or other surfaces.      Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home.      Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously.   Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home.  Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should.   “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution”  To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home.   To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here.    The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously.   The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties. This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it. Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping. Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time. image002.jpg On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home: 1. Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone. It is important to have a debris free surface, clear any clutter from the floor or other surfaces. Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home. Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously. Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home. Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should. “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution” To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home. To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here. The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously. The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.