The clock is ticking – how ready is your business for the ISDN & PSTN switch off?

The clock is ticking – how ready is your business for the ISDN & PSTN switch off?

All PSTN and ISDN networks will be closed by 2025, transitioning all UK businesses to all-VoIP networks to mitigate the rising costs of maintaining legacy equipment. According to managed services provider Espria, millions of UK businesses are expected to be impacted, especially those who still rely on fax machines and landlines.

Andy Fung, Solutions Architect, Espria, stated, “Businesses need to address this issue now and avoid sticking their heads in the sand. It is going to happen whether they are ready or not. Decision makers should not wait until 2025, as exchanges are being phased out now.”

BT Openreach announced back in November 2017 its intention to switch off analogue and ISDN lines in 2025, affecting PSTN-based services and some broadband services. BT Openreach’s logic was based on the fact that since ISDN’s (Integrated service digital network) first iteration in the 1990’s, digital demands on networks for organisations and homes have changed dramatically, and the underlying technology needs to reflect and support modern requirements.

A rapid audit of your network is recommended to understand how many connections you have, of what type and what they are being used for. Leaving it to the last minute could result in increased installation costs and delays. Depending on the nature of your organisation, these could be anything from simple voice lines to DSL broadband, building alarm circuits or even all external connectivity to the telephony system in use.

“Organisations can get prepared for the 2025 switch-off because BT Openreach is taking a phased stop sell approach at individual city locations taking place between December 2020 to August 2023. When a location has met its stop sell deadline, then analogue and ISDN lines cannot be purchased or have additional features or changes made to existing service,” continued Fung.

“If your organisation is using analogue phone lines, ISDN or broadband services running over analogue lines, at the end of December 2025 these will be switched off and become end of life.”

These include:

Analogue phone lines (including dial up devices, fax, modem, and PDQ machines)
ISDN (ISDN2 and ISND30)
Some broadband services (ADSL, Max, 2+ and FTTC circuits)
“If you’re still in contract with a line that is coming to end of life, like ISDN and PSTN, you need to start looking at your current technology ecosystem and get prepared”, continued Fung.

Espria has recommended the following the tips:

If you’re renewing contracts, look to move to a future-proofed solution
When you’re opening a new site location, consider IP based connectivity options
Assess your existing telephony options, if you’re using an on-site PBX with analogue or digital inbound/outbound lines review the marketplace for suitable VoIP (Voice over Internet Protocol) options including IP telephony and Microsoft Teams.
“However, this also presents an opportunity for organisations to reassess their business communications as a whole. Implementing cloud phones as part of a wider unified communications plan allows an organisation to overhaul outdated communications infrastructure and save costs with comprehensive and targeted change.

“This is best completed and managed with the assistance of industry experts able to bring together phone lines, video calls, email, chat tools, file sharing and more. With the right assistance, you can improve your company’s communications, save money and seamlessly integrate all aspects of communications and connectivity,” concluded Fung.

Leicester TV

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties.     This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it.   Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping.   Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time.   image002.jpg   On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home:   1.     Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone.    It is important to have a debris free surface, clear any clutter from the floor or other surfaces.      Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home.      Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously.   Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home.  Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should.   “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution”  To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home.   To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here.    The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously.   The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties. This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it. Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping. Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time. image002.jpg On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home: 1. Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone. It is important to have a debris free surface, clear any clutter from the floor or other surfaces. Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home. Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously. Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home. Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should. “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution” To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home. To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here. The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously. The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.