BoE rise to 5.25%: Mortgage Expert Outlines What This Means for Homeowners

BoE rise to 5.25%: Mortgage Expert Outlines What This Means for Homeowners

Kellie Steed, Uswitch.com mortgage expert comments:

03 August: How will lenders respond to the base rate rising again?The Bank of England Monetary Policy Committee has today announced the 14th consecutive rise in the UK base rate, which now sits at a 15 year high of 5.25%. This one has certainly been more difficult to predict and will likely come as a surprise to some economists, who believed that we’d seen rates peak for now.

The slight reduction in inflation reported in July, led some to believe that the base rate would stay put this time. Although the majority felt that with inflation still above 7%, either a 0.25% or 0.5% raise in the base rate was likely. What most mortgage holders will be waiting to see, of course, is how today’s announcement will impact mortgage rates.

Are rates falling?
NatWest, Halifax and Virgin Money all cut rates across a range of their mortgage products yesterday, ahead of today’s announcement. However, it’s important to note that lenders factor in the cost of fixed-rate deals quite far in advance, so today’s increase would likely not have influenced their decision greatly, no matter whether it increased or decreased. However, lender confidence is certainly improving generally, as last week also saw three more major lenders , Nationwide, Barclays and TSB cut many of their rates even further ahead of the BoE announcement.

Whether mortgage interest rates continue to be cut throughout the remainder of 2023 depends on wider economic circumstances, such as the future trajectory of inflation. ONS release the next inflation data in just under two weeks, on 16 August.

Is it time to fix?

As of today, the average 75% LTV 2 year fixed-rate deal is at 6.81% for residential purchase – still higher than the peak of 6.65% seen in October 2022 after the September mini-budget. 5 year fixes remain slightly lower, at an average rate of 6.45% at 75% LTV for residential mortgages.

People are, understandably, reluctant to lock in a high interest rate when there’s growing confidence that mortgage rates look to be gradually declining. However the average SVR remains high, at 8.49%, so despite the relatively modest reductions seen in both fixed and variable deals recently, it’s still absolutely worth looking at your remortgage options to avoid a high SVR.

Don’t forget, you can switch your mortgage deal up to six months ahead of your current deals end date – allowing you to lock in a new rate now, just in case. If rates do fall, then you’re not locked into the deal until your existing one expires, so you can just switch again to the cheapest product available at the time. However, if rates unexpectedly rise again, you’ll already have secured a more competitive deal, giving you less to worry about.

What about variable rates?

Those with a tracker mortgage will weather another immediate rise in their current interest rate from today. Despite the impending 0.25% increase in the base rate, as of today, the average 2-year tracker is still cheaper than the average fixed-rate mortgage, at 5.69% at 75% LTV.

Nevertheless after 14 consecutive increases, many will be seriously considering whether the security of a short fixed-rate deal is worth the additional cost.What to do if you’re struggling to pay your mortgage.

Back in June, The Mortgage Charter was drawn up between the FCA, the government and most major mortgage lenders. It introduced a range of easements (or temporary coping measures) for those unable to afford their mortgage repayments.

On 1st August, UK Finance launched the Reach Out campaign to draw further attention to the mortgage charter, in an attempt to ensure those struggling know what help is available to them.Lenders are aware that recent dramatic interest rate rises have impacted their customers’ affordability and most are poised to help in whatever way possible. The emphasis is to ‘reach out’ to your lender, rather than waiting until you become completely unable to pay your mortgage.

https://www.uswitch.com/mortgages/

Rugged Hank

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties.     This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it.   Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping.   Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time.   image002.jpg   On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home:   1.     Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone.    It is important to have a debris free surface, clear any clutter from the floor or other surfaces.      Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home.      Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously.   Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home.  Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should.   “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution”  To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home.   To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here.    The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously.   The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties. This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it. Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping. Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time. image002.jpg On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home: 1. Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone. It is important to have a debris free surface, clear any clutter from the floor or other surfaces. Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home. Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously. Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home. Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should. “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution” To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home. To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here. The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously. The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.