MOT? More like DIY

MOT? More like DIY

MOT? More like DIY – Drivers Urged to Maintain Cars Themselves

Motorists have been told to maintain their vehicles if proposed changes to MOTs come into force.

Experts from Quotezone.co.uk have warned drivers to ensure their vehicles are roadworthy after proposals to extend the period between tests.

The proposals have come via a consultation jointly published by the Department for Transport (DfT) and Driver and Vehicle Standards Agency (DVSA), affecting cars, motorbikes and vans.

Currently, all new vehicles must be tested after they reach three years old, to ensure they do not present a danger to other road users.

But if the new proposals are adopted, this period will be extended to four years, in line with many other countries across Europe.

Advances in technology and the increase in popularity of EVs and hybrid cars mean new vehicles are less likely to need major attention at three years old.

They also suggest that the period between MOT tests could also be extended from one year for newer vehicles.

While the experts from Quotezone.co.uk welcome the chance for drivers to create savings, safety must always be the number one priority and both the government and the motorists themselves have a duty to ensure their cars, vans and motorbikes are safe to operate.

Many countries across Europe have the four year policy, and the proposals would bring Britain in line with countries like Belgium, Denmark, France, Italy, Spain and Portugal.

Government analysis shows less frequent MOT tests could save UK drivers around £100 million per year.

Quotezone.co.uk did a sample survey in Northern Ireland – where all vehicles must be tested at a dedicated MOT centre – putting the system under increasing pressure to clear the pandemic backlog. 43% of drivers were said to be waiting over 3 months for an available test date and 59% were driving on the road pass their test due date.

These proposed changes may alleviate some issues but it’s important to remember 1 in 10 vehicles fail their MOT first time, under the proposal these vehicles would now be on the road for an additional year which some experts fear may increase the number of unsafe vehicles on our roads.

Quotezone.co.uk Founder Greg Wilson has said: “These proposals to have less frequent MOT tests is likely to put the onus on the driver to more regularly maintain the vehicle and ensure its roadworthy.

“Whilst of course money saving benefits are great in this economic climate, getting into an accident or driving an unsafe car could result in costs far bigger than a £40 MOT.

“There are several routine checks which drivers can do at home to help their vehicle stay in a safe and roadworthy condition.”

Quotezone.co.uk has provided checks you can make on your car:

Check tyres:
Before setting off, it is important to check for any cuts or wear. It is also good to check if the tyre pressures are appropriate for the load and condition of the tyres. The minimum and legal limit for tread depth of the tyres is 1.6mm – drivers can insert a 20p into the tread to double check, the tyre thickness should be more than the first line on the coin.

Check lights:
You need to make sure your indicators, hazard lights, headlights, fog lights, reverse lights and brake lights all work. Having any of these not working or in a temperamental condition could put you, passengers and other motorists at risk.

Check brakes:
The braking system needs to be in good working order. If the car pulls to one side when applying the breaks then this indicates an issue. Look at the handbrake too and ensure it works well, especially on an incline. If you have alloy wheels, it could be possible to do a visual inspection of the brakes without actually removing the wheel.

Check fluid levels:
Keep your screen wash topped up so you can clean dirt off your windscreen and ensure you have good visibility and top up break fluid and oil.

Check mirrors:
All mirrors must be secure and free of cracks. If they need replacing you can normally find ones for your car model online, but stay clear of self-adhesive types as these are not durable.

Check windscreen and wipers:
Ensure there is no damage to your windscreen. A chip or crack that exceeds 40mm will actually result in a failed MOT test. On top of the windscreen, the wipers and washers should be functional to ensure good visibility at all times.

Rugged Hank

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties.     This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it.   Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping.   Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time.   image002.jpg   On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home:   1.     Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone.    It is important to have a debris free surface, clear any clutter from the floor or other surfaces.      Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home.      Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously.   Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home.  Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should.   “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution”  To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home.   To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here.    The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously.   The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties. This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it. Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping. Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time. image002.jpg On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home: 1. Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone. It is important to have a debris free surface, clear any clutter from the floor or other surfaces. Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home. Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously. Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home. Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should. “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution” To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home. To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here. The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously. The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.