Road Racers Beware – Government to eradicate nuisance drivers with new noise pollution scheme

Road Racers Beware – Government to eradicate nuisance drivers with new noise pollution scheme

Road Racers Beware
Government to eradicate nuisance drivers with new noise pollution scheme

Motoring groups are eagerly awaiting the outcome of a government trial to combat noise pollution across Britain.

The government is looking to increase fines for noise pollution and find a better solution to catch more offending vehicles – this is where the new ‘noise’ cameras come in.

The Department for Transport (DfT) completed the two-month trial of ‘noise cameras’ within four UK cities – Bradford, Bristol, Great Yarmouth and Birmingham.*

The cities won a nationwide competition to host the cameras as part of the scheme that ended in December 2022, with announcements expected on which cities the scheme will next be rolled out to, according to analysis by motoring experts Quotezone.co.uk.

The aim of the scheme is to identify antisocial drivers to reduce noise pollution and eradicate nuisance drivers who have illegally modified their engines and exhausts.

Noise pollution levels were recorded at various sites with the long-term aim of reducing noise pollution across the UK to restore peace to local communities who have been affected by the noise made from ‘road racer’ drivers who modify their cars.

It’s illegal to modify the exhaust system to make a vehicle noisier after it has been ‘type approved’ (checked it meets environmental and safety standards).

The police can also take action if the vehicle’s silencer doesn’t work in the way it was intended or if the way the car is driven creates too much noise.

The most recent data shows that almost 50% of Brits complain that these noisy drivers are the worst motorists on UK roads.**

The drivers in question illegally modify their cars by altering the exhaust and engine to break the legal noise limit of 74 decibels – which is about as loud as a vacuum cleaner – above 70 decibels over a prolonged period of time can start to damage hearing.***

If drivers are caught with these anti-social modifications, they could currently be given a £50 on-the-spot fine with the vehicle taken off the road until the noise level is reduced to below the legal limit.

Drivers who modify their exhausts could see higher car insurance premiums and risk having claims rejected if they fail to inform their insurer about the modifications.

Greg Wilson, founder and CEO of Quotezone.co.uk said: “Most of us have been affected by so-called ‘road racers’. These drivers can actually start to damage peoples hearing and plague local communities, particularly those with young families who are trying to get children to sleep.

“We, like other motoring groups, welcome the DfT’s trial scheme to help reduce the number of noise disturbances with their innovative acoustic camera technology.

“The cameras can immediately detect when noise levels exceed the legal limit of 74 decibels – helping the police to crackdown on these offences.

“If it’s successful we hope to see noise cameras appearing in cities right across the UK.”

The Department for Transport (DfT), recently stated that nuisance drivers across the country are partly to blame for lost productivity in people’s jobs due to sleep disturbance, and health costs from strokes and heart attacks.****

The innovative ‘noise cameras’ help to catch offenders because they automatically detect vehicles which are breaking the legal noise requirements, feeding evidence back to the police.

Without the help of the new noise capturing technology, the police have trouble gathering evidence to charge those who have excessively loud engines and exhausts.

The new technology, which was backed by £300,000 in the initial trial phase, is designed to help the crackdown on rogue drivers and restore peace and quiet across the country.

In a period of nine months, a separate pilot scheme trialled in the London borough of Kensington and Chelsea caught nearly 10,000 vehicles – they also found that BMW cars were the most offending vehicle.

Rugged Hank

Education Technology Day must be extended to prisons

Education Technology Day must be extended to prisons

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties. This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it. Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping. Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time. image002.jpg On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home: 1. Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone. It is important to have a debris free surface, clear any clutter from the floor or other surfaces. Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home. Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously. Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home. Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should. “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution” To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home. To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here. The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously. The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.

Typically thought of as being an easy to clean area of the home, hard floors have risen in popularity in recent decades. Globally, hard floors are the most common floor type,2 and research released today by Dyson has uncovered poor cleaning habits that mean hard floors are likely to be harbouring an array of hidden nasties. This comes as 32% of Brits – equating to 21.6 million people in the UK – will use the same dirty mop head for six months or more before replacing it. What’s more, one in 20 also admit to keeping the same mop for a year or longer, and one in 10 think it is acceptable to use the same mop 100 times, spreading dirt around their floors every time they use it. Cross contamination is a primary issue for most common and traditional mopping methods with germs and bacteria further being unknowingly spread around homes as Brits use dirty water to clean floors.3 45% only change the water to new water between rooms, whereas 41% wait even longer until it looks dirty. This could mean that floors are being washed with dirty water, adding more dirt rather than taking it away. Surprisingly, almost one in 10 (9%) even admit to not changing the dirty water at all when mopping. Over a quarter (28%) admit to mopping their floors once a fortnight or less while over half (53%) admit they don’t regularly clean behind appliances and leave dirt to build up for as long as six months at a time. image002.jpg On how to achieve a perfect barefoot clean feel after mopping, Geli Lee, Dyson Engineer and Home Cleaning Expert offers their top tips for eliminating dirt around the home: 1. Create a cleaning schedule to stay on top of dirt build-up. In the last year, there has been a 15% global reduction in the number of people who maintain regular cleaning schedules. 47% of the British public admitted to only being motivated to clean when they spot visible dirt or dust.4 Regular floor cleaning with a wet hard floor cleaner like the Dyson WashG1™ removes more stubborn dirt than vacuuming alone. It is important to have a debris free surface, clear any clutter from the floor or other surfaces. Choose the right machine: Different vacuums are designed for different floor types and home sizes. Some machines will be engineered with hard floors in mind and will struggle on thick pile carpets, for example. Choosing the right machine for your home will make a big difference to the ease and speed with which you’re able to clean your home. Clean your floors ‘little and often’. Washing your floors frequently in areas that receive more foot fall will help to stop dirt building up and getting trodden into your floor. Using a dedicated wet floor cleaner on hard flooring such as the Dyson WashG1 is helpful for this, as the versatile format means it vacuums and washes the floor simultaneously. Cleaning schedules have also become less regimented. In recent years only 41% of people claim to have a regular cleaning schedule, and 60% admit to cleaning reactively; being motivated to clean only when there is visible dirt or dust5. It’s perhaps not surprising, that a fifth of people are still concerned their floors are dirty after they’ve mopped them (22%) and one in four6 feel extremely worried about indoor dust at home. Geli Lee, Dyson Engineer and Home Cleaning Expert reveals why it is important to change the way we mop: “Cleaning your hard floors properly and regularly is important for maintaining a healthy environment around your home. Without a proper cleaning routine, dirt may unknowingly build up and spread around your home. It is evident from our research that current mopping habits mean British households aren’t cleaning their floors as effectively as they should. “From ignoring problem areas where dust and debris build up, cross contamination with dirty water to not replacing mop heads or inconsistent cleaning, current mopping behaviours may be making floors dirtier as opposed to cleaner. Moving away from traditional methods, wet floor cleaners like the Dyson WashG1 simplify the floor cleaning experience and provide a modern efficient and hygienic solution” To help take the guesswork out of mopping, the brand new WashG1 is Dyson’s first dedicated wet floor cleaner that tackles wet and dry debris in one go. Engineered for hygienic cleaning and maintenance, the WashG1 is revolutionising wet floor cleaning, removing the need for multi-products and multi-steps to achieve a barefoot clean feel around the home. To put the product to the test, Dyson have cleaned one of London’s most iconic landmarks The Victoria and Albert Museum. From cleaning the grand marble floors housing the most prestigious exhibits, to cleaning up leftover food in the Gamble Room Cafe, the WashG1 had a dirt busting tour of the museum leaving it spotless. Images can be found here. The WashG1 introduces Dyson’s engineering expertise to cleaning hard floors. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry spills and stains simultaneously. The Dyson WashG1 is available to purchase now from Dyson.co.uk, retailing at £599.99.

Housing shortfall calls for public-private collaboration

Housing shortfall calls for public-private collaboration

Seven ways to decorate your home when renting

Seven ways to decorate your home when renting

65% of Brits are concerned about marine life

65% of Brits are concerned about marine life

Muntada Aid – Landmark 50th Mission to Take Place in Tunisia this September as Little Hearts nears 3,000 Lifesaving Operations

Muntada Aid – Landmark 50th Mission to Take Place in Tunisia this September as Little Hearts nears 3,000 Lifesaving Operations